Model 3 Door Handle Overlays - Real Forged Carbon Fiber
Our Forged Door Handle Overlays come in a set of 4 to cover up the chrome on your Model 3. Forged Carbon Fiber composite is a material composed of small pieces of carbon fiber that are pressed into shape as the resin cures. The material is one-third as dense as metal titanium but stronger, and consists of chopped carbon fiber tows that are layered between two layers of filmed resin.
INSTALLATION:
Note: The door handle assembly is not consistently positioned for every model. Please watch our Adjustment video before ordering!
ADJUSTING:
If you notice the handles dragging after installation, we suggest the following steps:
Step 1: Use a heat gun or hair dryer on the handle as this will liquify and soften the double sided adhesive on the back. Make sure the double sided adhesive gets really hot. Then you will be able to make minor adjustments by pushing the overlay in the opposite direction of where its making contact with your door.
Step 2: Warm up the handle overlay again and remove it slowly. If the double sided tape remains stuck to the carbon fiber overlay, just try to reinstall it in a better location to avoid the dragging. If the tape comes off the overlay or sticks to your door handle, please let us know so we can send you a new pre-cut inlay of double sided tape.
Note: Be careful if following Step 2. snapping, cracking, or chipping the door handle overlay is not covered under our warranty. You may email us at rpmtesla@gmail.com to verify if we have replacements available. If not, then we may have to sell you an entirely new set.
INSTALLATION:
ADJUSTMENT:
Our Forged Door Handle Overlays come in a set of 4 to cover up the chrome on your Model 3. Forged Carbon Fiber composite is a material composed of small pieces of carbon fiber that are pressed into shape as the resin cures. The material is one-third as dense as metal titanium but stronger, and consists of chopped carbon fiber tows that are layered between two layers of filmed resin.
INSTALLATION:
Note: The door handle assembly is not consistently positioned for every model. Please watch our Adjustment video before ordering!
ADJUSTING:
If you notice the handles dragging after installation, we suggest the following steps:
Step 1: Use a heat gun or hair dryer on the handle as this will liquify and soften the double sided adhesive on the back. Make sure the double sided adhesive gets really hot. Then you will be able to make minor adjustments by pushing the overlay in the opposite direction of where its making contact with your door.
Step 2: Warm up the handle overlay again and remove it slowly. If the double sided tape remains stuck to the carbon fiber overlay, just try to reinstall it in a better location to avoid the dragging. If the tape comes off the overlay or sticks to your door handle, please let us know so we can send you a new pre-cut inlay of double sided tape.
Note: Be careful if following Step 2. snapping, cracking, or chipping the door handle overlay is not covered under our warranty. You may email us at rpmtesla@gmail.com to verify if we have replacements available. If not, then we may have to sell you an entirely new set.
INSTALLATION:
ADJUSTMENT:
Original: $173.75
-65%$173.75
$60.81Description
Our Forged Door Handle Overlays come in a set of 4 to cover up the chrome on your Model 3. Forged Carbon Fiber composite is a material composed of small pieces of carbon fiber that are pressed into shape as the resin cures. The material is one-third as dense as metal titanium but stronger, and consists of chopped carbon fiber tows that are layered between two layers of filmed resin.
INSTALLATION:
Note: The door handle assembly is not consistently positioned for every model. Please watch our Adjustment video before ordering!
ADJUSTING:
If you notice the handles dragging after installation, we suggest the following steps:
Step 1: Use a heat gun or hair dryer on the handle as this will liquify and soften the double sided adhesive on the back. Make sure the double sided adhesive gets really hot. Then you will be able to make minor adjustments by pushing the overlay in the opposite direction of where its making contact with your door.
Step 2: Warm up the handle overlay again and remove it slowly. If the double sided tape remains stuck to the carbon fiber overlay, just try to reinstall it in a better location to avoid the dragging. If the tape comes off the overlay or sticks to your door handle, please let us know so we can send you a new pre-cut inlay of double sided tape.
Note: Be careful if following Step 2. snapping, cracking, or chipping the door handle overlay is not covered under our warranty. You may email us at rpmtesla@gmail.com to verify if we have replacements available. If not, then we may have to sell you an entirely new set.
INSTALLATION:
ADJUSTMENT:
